Service Rifle - NRA Target - Black Powder Shooting - BANZ Shooting Accessories - nzrifle.com Trout fishing lakes & Rivers -  WWII Coastal Defence

 

 

Navigation.....
I--- nzrifle.com
       I--- ** BANZ Nitro Rifle & Pistol Powders **

BANZ
NITRO RIFLE & PISTOL POWDERS
(Updated 16 December 2008)
 

N110 N140 N165 N560 N340
1kg (Out of Stock) 1kg $145 1Kg (Out of Stock) 1Kg (Out of Stock) 500gm  $65
This is a very fast burning propellant that can be used in applications which previously used Hercules 2400, Hodgdon H110, or Winchester 296. Typical applications include: .22 Hornet, .25-20 Winchester, .357 S&W Magnum, .357 Maximum, .44 Magnum and .45 Winchester Magnum.
This powder can usually be used in place of Hercules Reloader 15, IMR 4320, and Hodgdon H380. Applications include: .222 Remington Magnum, .22-250 Remington (factory powder), .30-.30 Winchester, .308 Winchester, .30-06 Springfield, .375 H&H Magnum, and so on.
A very slow burning magnum propellant for use with heavy bullets. Applications begin with heavy bullets in the .30-06, and include the .338 Winchester Magnum.

 

 

 

 Burning rate like N160. Especially for .270 Winchester and 6.5 x 55 Swedish Mauser.

 

 

 

 

 With a burning rate not dissimilar to Winchester 540 or Herco, this powder is a wide application type. Data for the following handgun cartridges is currently available: 30 Luger, 9mm Luger, .38 S & W (Colt New Police), .38 Super Auto, .38 Special, .357 Magnum, .44 Magnum, .45 Auto and .45 (Long) Colt.

Click Here to view Vihtavuori Powder Information

 

ADI Powders
Fastest to Slowest Burning Rates
748 AR2205 AR2207 BM1
1lb $65 500gm $65   100gm $15

 
The low flame temperature of 748 extends barrel life versus other similar speed powders. It can be used in a wide variety of centerfire rifle loads including 222 Rem, 30-30 Win, 308 Win, and up to 458 Win. Mag. Combine Winchester components with 748 to duplicate 308 Win factory load ballistics. A very fine grained, very fast burning rifle powder suited to .22 Hornet loads but also useful in some Magnum pistol loads. Its burning rate is close to that of IMR 4227.

 

 

 A very useful fine grained fast burning rifle powder for cartridges such as the .222 Remington and 7.62mm x 39 Russian. Its burning rate is close to that of IMR 4198 although it meters significantly better through standard powder loaders.

 

 A very fine grained powder with very high bulk density and superior metering characteristics for use by bench rest shooters in cartridges such as .22 PPC. It is intermediate in burning rate between AR2207 and AR2206.

 

 

Click Here to view Winchester Powder Information

Click Here  to view ADI Powder Information

ADI Powders
Fastest to Slowest Burning Rates
BM2 AR2206 AR2206H AR2208
500gm $65   100gm $15

A fine grained powder with very high bulk density and superior metering characteristics for use in national rifle association match loads such as 223 Remington with 68-69 grain projectiles. It is similar in burning rate close to AR2206, but can be faster depending on the calibre used.

 

 A very versatile medium burning rifle powder suitable for use in .308 Winchester. Originally developed for the Australian Defence Forces 7.62mm. It can also be used in a wide range of other cartridges.

 

 

 Has a burning rate slightly slower than AR2206 and is between AR2206 and AR2208. A very versatile powder in a range of calibres giving outstanding accuracy.

 

 

 A useful fine grained medium/slow burning rifle powder for medium sized cartridges such as .308 Winchester and 25-06. Its burning rate is close to that of IMR 4064 but its bulk density is higher.

 

 

ADI Powders
Fastest to Slowest Burning Rates
AR2209 AR2213SC AR2219  
500gm $65   100gm $15

A useful fine grained, moderately slow burning rifle powder for cartridges such as 22-250, .243 Winchester, .270 Winchester, 30-06 and 300 Winchester Magnum. Its burning rate is close to that of IMR 4350 but its bulk density is a little higher and its metering through a powder loader is better.

 

 

 

 

 

 A slow burning rate rifle powder for cartridges such as .270 Winchester and 300 Winchester Magnum. AR2213SC replaced AR2213 in the Australian reloading market. AR2213 had been produced by ADI only for supply to the Australian reloading market and was only manufactured every three to four years. As a result, the powder that reached the shooter may not be of recent manufacture and stockout situations occasionally occurred. ADI produces AR2213SC for the North American reloading market and is in regular production. This enables ADI to be in a better position to guarantee supply Originally developed for the Australian Defence Force 5.56mm its burning rate lies between Bench Mark 1 and Bench Mark 2. It is considered having good accuracy in small and medium capacity cartridges.

 

 

 

 

 

 

  

All Nitro & Black Powder sales are "Pick-up" ONLY

Questions or problems regarding this web site should be directed to webmaster@nzrifle.com
Copyright © 2006 - 2008 nzrifle.com. All rights reserved.
Last modified: 11/02/08.